Price is modified by the choice of wood. To choose a custom depth in 1/4" increments, select the next highest depth and enter the custom depth in the text box below. Minimum depth for the Vintage style is 11".

Choose a hardware option if the piece has doors or drawers.

If you want to decrease any dimension, specify the custom height, width or depth to the nearest 1/4 inch. If converting to a hutch, specify the height to the the top of the fixed shelf.

A flush side is one where the moulding is cut off even with the side so that it can fit next to a wall or another bookcase.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening above the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening below the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Arch or Cathedral tops are not available on mitered doors.

The hanging strip is a 3/4" thick piece of wood mounted inside that provides a more secure way to attach the bookcase to the wall. The wall-hanging option adds a hanging strip and makes the bottom rail the same width as the top rail. The finished bottom puts a flat bottom underneath, which looks better when it is mounted high on the wall.

A hutch will have a fixed shelf at your choice of height, one fewer adjustable shelf, and crown moulding at the top (no 3/4" thick finished top). Click for suggestions on fixed shelf height.

This option will replace the plain wood back with a beadboard wood back. Click to see a bookcase with a beadboard back.

This option adds a 1-1/2"W center divider down the bookcase, but when choosing the hutch option, the divider only extends above the fixed shelf. Click to see an example of bookcases with a center divider.

This option changes the bookcase top by replacing the crown moulding with a finished banded plywood top and cove moulding like bookcases shorter than 72"H (adds 3/4" to bookcase height).

Price is modified by the choice of wood. To choose a custom depth in 1/4" increments, select the next highest depth and enter the custom depth in the text box below. Minimum depth for the Vintage style is 11".

Choose a hardware option if the piece has doors or drawers.

If you want to decrease any dimension, specify the custom height, width or depth to the nearest 1/4 inch. If converting to a hutch, specify the height to the the top of the fixed shelf.

A flush side is one where the moulding is cut off even with the side so that it can fit next to a wall or another bookcase.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening above the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening below the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Arch or Cathedral tops are not available on mitered doors.

The hanging strip is a 3/4" thick piece of wood mounted inside that provides a more secure way to attach the bookcase to the wall. The wall-hanging option adds a hanging strip and makes the bottom rail the same width as the top rail. The finished bottom puts a flat bottom underneath, which looks better when it is mounted high on the wall.

A hutch will have a fixed shelf at your choice of height, one fewer adjustable shelf, and crown moulding at the top (no 3/4" thick finished top). Click for suggestions on fixed shelf height.

This option will replace the plain wood back with a beadboard wood back. Click to see a bookcase with a beadboard back.

This option adds a 1-1/2"W center divider down the bookcase, but when choosing the hutch option, the divider only extends above the fixed shelf. Click to see an example of bookcases with a center divider.

This option changes the bookcase top by replacing the crown moulding with a finished banded plywood top and cove moulding like bookcases shorter than 72"H (adds 3/4" to bookcase height).

Price is modified by the choice of wood. To choose a custom depth in 1/4" increments, select the next highest depth and enter the custom depth in the text box below. Minimum depth for the Vintage style is 11".

Choose a hardware option if the piece has doors or drawers.

If you want to decrease any dimension, specify the custom height, width or depth to the nearest 1/4 inch. If converting to a hutch, specify the height to the the top of the fixed shelf.

A flush side is one where the moulding is cut off even with the side so that it can fit next to a wall or another bookcase.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening above the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening below the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Arch or Cathedral tops are not available on mitered doors.

The hanging strip is a 3/4" thick piece of wood mounted inside that provides a more secure way to attach the bookcase to the wall. The wall-hanging option adds a hanging strip and makes the bottom rail the same width as the top rail. The finished bottom puts a flat bottom underneath, which looks better when it is mounted high on the wall.

A hutch will have a fixed shelf at your choice of height, one fewer adjustable shelf, and crown moulding at the top (no 3/4" thick finished top). Click for suggestions on fixed shelf height.

This option will replace the plain wood back with a beadboard wood back. Click to see a bookcase with a beadboard back.

This option adds a 1-1/2"W center divider down the bookcase, but when choosing the hutch option, the divider only extends above the fixed shelf. Click to see an example of bookcases with a center divider.

This option changes the bookcase top by replacing the crown moulding with a finished banded plywood top and cove moulding like bookcases shorter than 72"H (adds 3/4" to bookcase height).

Price is modified by the choice of wood. To choose a custom depth in 1/4" increments, select the next highest depth and enter the custom depth in the text box below. Minimum depth for the Vintage style is 11".

Choose a hardware option if the piece has doors or drawers.

If you want to decrease any dimension, specify the custom height, width or depth to the nearest 1/4 inch. If converting to a hutch, specify the height to the the top of the fixed shelf.

A flush side is one where the moulding is cut off even with the side so that it can fit next to a wall or another bookcase.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening above the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening below the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Arch or Cathedral tops are not available on mitered doors.

The hanging strip is a 3/4" thick piece of wood mounted inside that provides a more secure way to attach the bookcase to the wall. The wall-hanging option adds a hanging strip and makes the bottom rail the same width as the top rail. The finished bottom puts a flat bottom underneath, which looks better when it is mounted high on the wall.

A hutch will have a fixed shelf at your choice of height, one fewer adjustable shelf, and crown moulding at the top (no 3/4" thick finished top). Click for suggestions on fixed shelf height.

This option will replace the plain wood back with a beadboard wood back. Click to see a bookcase with a beadboard back.

This option adds a 1-1/2"W center divider down the bookcase, but when choosing the hutch option, the divider only extends above the fixed shelf. Click to see an example of bookcases with a center divider.

This option changes the bookcase top by replacing the crown moulding with a finished banded plywood top and cove moulding like bookcases shorter than 72"H (adds 3/4" to bookcase height).

Price is modified by the choice of wood. To choose a custom depth in 1/4" increments, select the next highest depth and enter the custom depth in the text box below. Minimum depth for the Vintage style is 11".

Choose a hardware option if the piece has doors or drawers.

If you want to decrease any dimension, specify the custom height, width or depth to the nearest 1/4 inch. If converting to a hutch, specify the height to the the top of the fixed shelf.

A flush side is one where the moulding is cut off even with the side so that it can fit next to a wall or another bookcase.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening above the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening below the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Arch or Cathedral tops are not available on mitered doors.

The hanging strip is a 3/4" thick piece of wood mounted inside that provides a more secure way to attach the bookcase to the wall. The wall-hanging option adds a hanging strip and makes the bottom rail the same width as the top rail. The finished bottom puts a flat bottom underneath, which looks better when it is mounted high on the wall.

A hutch will have a fixed shelf at your choice of height, one fewer adjustable shelf, and crown moulding at the top (no 3/4" thick finished top); the center divider will not extend below the fixed shelf and there are no adjustable shelves for the space under the fixed shelf. Click for suggestions on fixed shelf height.

This option will replace the plain wood back with a beadboard wood back. Click to see a bookcase with a beadboard back.

This option changes the bookcase top by replacing the crown moulding with a finished banded plywood top and cove moulding like bookcases shorter than 72"H (adds 3/4" to bookcase height).

Price is modified by the choice of wood. To choose a custom depth in 1/4" increments, select the next highest depth and enter the custom depth in the text box below. Minimum depth for the Vintage style is 11".

Choose a hardware option if the piece has doors or drawers.

If you want to decrease any dimension, specify the custom height, width or depth to the nearest 1/4 inch. If converting to a hutch, specify the height to the the top of the fixed shelf.

A flush side is one where the moulding is cut off even with the side so that it can fit next to a wall or another bookcase.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening above the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening below the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Arch or Cathedral tops are not available on mitered doors.

The hanging strip is a 3/4" thick piece of wood mounted inside that provides a more secure way to attach the bookcase to the wall. The wall-hanging option adds a hanging strip and makes the bottom rail the same width as the top rail. The finished bottom puts a flat bottom underneath, which looks better when it is mounted high on the wall.

A hutch will have a fixed shelf at your choice of height, one fewer adjustable shelf, and crown moulding at the top (no 3/4" thick finished top); the center divider will not extend below the fixed shelf and there are no adjustable shelves for the space under the fixed shelf. Click for suggestions on fixed shelf height.

This option will replace the plain wood back with a beadboard wood back. Click to see a bookcase with a beadboard back.

This option changes the bookcase top by replacing the crown moulding with a finished banded plywood top and cove moulding like bookcases shorter than 72"H (adds 3/4" to bookcase height).

Price is modified by the choice of wood. To choose a custom depth in 1/4" increments, select the next highest depth and enter the custom depth in the text box below. Minimum depth for the Vintage style is 11".

Choose a hardware option if the piece has doors or drawers.

If you want to decrease any dimension, specify the custom height, width or depth to the nearest 1/4 inch. If converting to a hutch, specify the height to the the top of the fixed shelf.

A flush side is one where the moulding is cut off even with the side so that it can fit next to a wall or another bookcase.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening above the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening below the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Arch or Cathedral tops are not available on mitered doors.

The hanging strip is a 3/4" thick piece of wood mounted inside that provides a more secure way to attach the bookcase to the wall. The wall-hanging option adds a hanging strip and makes the bottom rail the same width as the top rail. The finished bottom puts a flat bottom underneath, which looks better when it is mounted high on the wall.

A hutch will have a fixed shelf at your choice of height, one fewer adjustable shelf, and crown moulding at the top (no 3/4" thick finished top). Click for suggestions on fixed shelf height.

This option will replace the plain wood back with a beadboard wood back. Click to see a bookcase with a beadboard back.

This option adds a 1-1/2"W center divider down the bookcase, but when choosing the hutch option, the divider only extends above the fixed shelf. Click to see an example of bookcases with a center divider.

This option changes the bookcase top by replacing the crown moulding with a finished banded plywood top and cove moulding like bookcases shorter than 72"H (adds 3/4" to bookcase height).

Price is modified by the choice of wood. To choose a custom depth in 1/4" increments, select the next highest depth and enter the custom depth in the text box below. Minimum depth for the Vintage style is 11".

Choose a hardware option if the piece has doors or drawers.

If you want to decrease any dimension, specify the custom height, width or depth to the nearest 1/4 inch. If converting to a hutch, specify the height to the the top of the fixed shelf.

A flush side is one where the moulding is cut off even with the side so that it can fit next to a wall or another bookcase.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening above the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening below the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Arch or Cathedral tops are not available on mitered doors.

The hanging strip is a 3/4" thick piece of wood mounted inside that provides a more secure way to attach the bookcase to the wall. The wall-hanging option adds a hanging strip and makes the bottom rail the same width as the top rail. The finished bottom puts a flat bottom underneath, which looks better when it is mounted high on the wall.

A hutch will have a fixed shelf at your choice of height, one fewer adjustable shelf, and crown moulding at the top (no 3/4" thick finished top). Click for suggestions on fixed shelf height.

This option will replace the plain wood back with a beadboard wood back. Click to see a bookcase with a beadboard back.

This option adds a 1-1/2"W center divider down the bookcase, but when choosing the hutch option, the divider only extends above the fixed shelf. Click to see an example of bookcases with a center divider.

This option changes the bookcase top by replacing the crown moulding with a finished banded plywood top and cove moulding like bookcases shorter than 72"H (adds 3/4" to bookcase height).

Price is modified by the choice of wood. To choose a custom depth in 1/4" increments, select the next highest depth and enter the custom depth in the text box below. Minimum depth for the Vintage style is 11".

Choose a hardware option if the piece has doors or drawers.

If you want to decrease any dimension, specify the custom height, width or depth to the nearest 1/4 inch. If converting to a hutch, specify the height to the the top of the fixed shelf.

A flush side is one where the moulding is cut off even with the side so that it can fit next to a wall or another bookcase.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening above the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening below the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Arch or Cathedral tops are not available on mitered doors.

The hanging strip is a 3/4" thick piece of wood mounted inside that provides a more secure way to attach the bookcase to the wall. The wall-hanging option adds a hanging strip and makes the bottom rail the same width as the top rail. The finished bottom puts a flat bottom underneath, which looks better when it is mounted high on the wall.

A hutch will have a fixed shelf at your choice of height, one fewer adjustable shelf, and crown moulding at the top (no 3/4" thick finished top). Click for suggestions on fixed shelf height.

This option will replace the plain wood back with a beadboard wood back. Click to see a bookcase with a beadboard back.

This option adds a 1-1/2"W center divider down the bookcase, but when choosing the hutch option, the divider only extends above the fixed shelf. Click to see an example of bookcases with a center divider.

This option changes the bookcase top by replacing the crown moulding with a finished banded plywood top and cove moulding like bookcases shorter than 72"H (adds 3/4" to bookcase height).

Price is modified by the choice of wood. To choose a custom depth in 1/4" increments, select the next highest depth and enter the custom depth in the text box below. Minimum depth for the Vintage style is 11".

Choose a hardware option if the piece has doors or drawers.

If you want to decrease any dimension, specify the custom height, width or depth to the nearest 1/4 inch. If converting to a hutch, specify the height to the the top of the fixed shelf.

A flush side is one where the moulding is cut off even with the side so that it can fit next to a wall or another bookcase.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening above the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening below the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Arch or Cathedral tops are not available on mitered doors.

The hanging strip is a 3/4" thick piece of wood mounted inside that provides a more secure way to attach the bookcase to the wall. The wall-hanging option adds a hanging strip and makes the bottom rail the same width as the top rail. The finished bottom puts a flat bottom underneath, which looks better when it is mounted high on the wall.

A hutch will have a fixed shelf at your choice of height, one fewer adjustable shelf, and crown moulding at the top (no 3/4" thick finished top). Click for suggestions on fixed shelf height.

This option will replace the plain wood back with a beadboard wood back. Click to see a bookcase with a beadboard back.

This option adds a 1-1/2"W center divider down the bookcase, but when choosing the hutch option, the divider only extends above the fixed shelf. Click to see an example of bookcases with a center divider.

This option changes the bookcase top by replacing the crown moulding with a finished banded plywood top and cove moulding like bookcases shorter than 72"H (adds 3/4" to bookcase height).

Price is modified by the choice of wood. To choose a custom depth in 1/4" increments, select the next highest depth and enter the custom depth in the text box below. Minimum depth for the Vintage style is 11".

Choose a hardware option if the piece has doors or drawers.

If you want to decrease any dimension, specify the custom height, width or depth to the nearest 1/4 inch. If converting to a hutch, specify the height to the the top of the fixed shelf.

A flush side is one where the moulding is cut off even with the side so that it can fit next to a wall or another bookcase.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening above the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening below the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Arch or Cathedral tops are not available on mitered doors.

The hanging strip is a 3/4" thick piece of wood mounted inside that provides a more secure way to attach the bookcase to the wall. The wall-hanging option adds a hanging strip and makes the bottom rail the same width as the top rail. The finished bottom puts a flat bottom underneath, which looks better when it is mounted high on the wall.

A hutch will have a fixed shelf at your choice of height, one fewer adjustable shelf, and crown moulding at the top (no 3/4" thick finished top); the center divider will not extend below the fixed shelf and there are no adjustable shelves for the space under the fixed shelf. Click for suggestions on fixed shelf height.

This option will replace the plain wood back with a beadboard wood back. Click to see a bookcase with a beadboard back.

This option changes the bookcase top by replacing the crown moulding with a finished banded plywood top and cove moulding like bookcases shorter than 72"H (adds 3/4" to bookcase height).

Price is modified by the choice of wood. To choose a custom depth in 1/4" increments, select the next highest depth and enter the custom depth in the text box below. Minimum depth for the Vintage style is 11".

Choose a hardware option if the piece has doors or drawers.

If you want to decrease any dimension, specify the custom height, width or depth to the nearest 1/4 inch. If converting to a hutch, specify the height to the the top of the fixed shelf.

A flush side is one where the moulding is cut off even with the side so that it can fit next to a wall or another bookcase.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening above the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Price is modified by the choice of wood and finishing. This option is for a set of doors covering the opening below the fixed shelf. Click to see door style examples. A lumber-banded door is a solid flat door with a plywood core and solid wood edges.

Arch or Cathedral tops are not available on mitered doors.

The hanging strip is a 3/4" thick piece of wood mounted inside that provides a more secure way to attach the bookcase to the wall. The wall-hanging option adds a hanging strip and makes the bottom rail the same width as the top rail. The finished bottom puts a flat bottom underneath, which looks better when it is mounted high on the wall.

A hutch will have a fixed shelf at your choice of height, one fewer adjustable shelf, and crown moulding at the top (no 3/4" thick finished top); the center divider will not extend below the fixed shelf and there are no adjustable shelves for the space under the fixed shelf. Click for suggestions on fixed shelf height.

This option will replace the plain wood back with a beadboard wood back. Click to see a bookcase with a beadboard back.

This option changes the bookcase top by replacing the crown moulding with a finished banded plywood top and cove moulding like bookcases shorter than 72"H (adds 3/4" to bookcase height).

Doors and drawer fronts can be built to overlay the face frame by 1/2 inch (standard overlay) or most of the frame (full overlay), or can be made so they fit into the frame flush with the front (inset). Examples can be seen on the door styles page.

Optional: To get glass doors, select a flat-panel, Shaker, or mitered flat-panel door style and use this option to convert the wood panel to a glass-prep panel (no glass included). Mitered doors are not available with mullions. The interior will be unfinished Birch unless you also upgrade to a finished interior, which will match the exterior wood species and finishing color. Click to see examples

Optional: Change from flat to arch or cathedral top on upper door panels. Not available on Shaker or Mitered Doors. Click to see examples

Optional: The stain-grade side option changes the type of material used on the sides of the cabinet from Birch plywood to Maple or Oak. The side will still be recessed 1/4-inch from the front corner. The stain-grade 3/4" flush side option also changes the side panel from 1/2" to a 3/4" thick so that the side will be flush with the face frame. The stain-grade matching end door option will have a flush side and a door attached to that flush side, which will stick out from the face frame by 3/4". If you have your cabinets stained or painted, the upgraded side will also be stained or painted. Click to view example of cabinet end options. An alternative is to use a separate end panel.

Optional: Other options to modify a base cabinet. For examples, see the cabinet options page.

Use this field to specify custom dimensions or any other notes about the cabinet if the options available are insufficient. Not all customizations are possible, so please see the Cabinet Options page for details.

Doors and drawer fronts can be built to overlay the face frame by 1/2 inch (standard overlay) or most of the frame (full overlay), or can be made so they fit into the frame flush with the front (inset). Examples can be seen on the door styles page.

Optional: To get glass doors, select a flat-panel, Shaker, or mitered flat-panel door style and use this option to convert the wood panel to a glass-prep panel (no glass included). Mitered doors are not available with mullions. The interior will be unfinished Birch unless you also upgrade to a finished interior, which will match the exterior wood species and finishing color. Click to see examples

Optional: Change from flat to arch or cathedral top on upper door panels. Not available on Shaker or Mitered Doors. Click to see examples

Optional: The stain-grade side option changes the type of material used on the sides of the cabinet from Birch plywood to Maple or Oak. The side will still be recessed 1/4-inch from the front corner. The stain-grade 3/4" flush side option also changes the side panel from 1/2" to a 3/4" thick so that the side will be flush with the face frame. The stain-grade matching end door option will have a flush side and a door attached to that flush side, which will stick out from the face frame by 3/4". If you have your cabinets stained or painted, the upgraded side will also be stained or painted. Click to view example of cabinet end options. An alternative is to use a separate end panel.

Optional: Other options to modify a base cabinet. For examples, see the cabinet options page.

Use this field to specify custom dimensions or any other notes about the cabinet if the options available are insufficient. Not all customizations are possible, so please see the Cabinet Options page for details.

Doors and drawer fronts can be built to overlay the face frame by 1/2 inch (standard overlay) or most of the frame (full overlay), or can be made so they fit into the frame flush with the front (inset). Examples can be seen on the door styles page.

Optional: To get glass doors, select a flat-panel, Shaker, or mitered flat-panel door style and use this option to convert the wood panel to a glass-prep panel (no glass included). Mitered doors are not available with mullions. The interior will be unfinished Birch unless you also upgrade to a finished interior, which will match the exterior wood species and finishing color. Click to see examples

Optional: Change from flat to arch or cathedral top on upper door panels. Not available on Shaker or Mitered Doors. Click to see examples

Optional: The stain-grade side option changes the type of material used on the sides of the cabinet from Birch plywood to Maple or Oak. The side will still be recessed 1/4-inch from the front corner. The stain-grade 3/4" flush side option also changes the side panel from 1/2" to a 3/4" thick so that the side will be flush with the face frame. The stain-grade matching end door option will have a flush side and a door attached to that flush side, which will stick out from the face frame by 3/4". If you have your cabinets stained or painted, the upgraded side will also be stained or painted. Click to view example of cabinet end options. An alternative is to use a separate end panel.

Optional: Other options to modify a base cabinet. For examples, see the cabinet options page.

Use this field to specify custom dimensions or any other notes about the cabinet if the options available are insufficient. Not all customizations are possible, so please see the Cabinet Options page for details.

Doors and drawer fronts can be built to overlay the face frame by 1/2 inch (standard overlay) or most of the frame (full overlay), or can be made so they fit into the frame flush with the front (inset). Examples can be seen on the door styles page.

Optional: To get glass doors, select a flat-panel, Shaker, or mitered flat-panel door style and use this option to convert the wood panel to a glass-prep panel (no glass included). Mitered doors are not available with mullions. The interior will be unfinished Birch unless you also upgrade to a finished interior, which will match the exterior wood species and finishing color. Click to see examples

Optional: Change from flat to arch or cathedral top on upper door panels. Not available on Shaker or Mitered Doors. Click to see examples

Hinge location from your perspective when looking at the front of the cabinet.

Standard cabinets have 5/8" thick Poplar drawers with full-extension drawer glides. Upgrade options include 5/8" thick hard Maple drawers and soft-close undermount full-extension drawer slides. Click to see examples.

Optional: The stain-grade side option changes the type of material used on the sides of the cabinet from Birch plywood to Maple or Oak. The side will still be recessed 1/4-inch from the front corner. The stain-grade 3/4" flush side option also changes the side panel from 1/2" to a 3/4" thick so that the side will be flush with the face frame. The stain-grade matching end door option will have a flush side and a door attached to that flush side, which will stick out from the face frame by 3/4". If you have your cabinets stained or painted, the upgraded side will also be stained or painted. Click to view example of cabinet end options. An alternative is to use a separate end panel.

Optional: Other options to modify a base cabinet. For examples, see the cabinet options page.

Use this field to specify custom dimensions or any other notes about the cabinet if the options available are insufficient. Not all customizations are possible, so please see the Cabinet Options page for details.

Doors and drawer fronts can be built to overlay the face frame by 1/2 inch (standard overlay) or most of the frame (full overlay), or can be made so they fit into the frame flush with the front (inset). Examples can be seen on the door styles page.

Optional: To get glass doors, select a flat-panel, Shaker, or mitered flat-panel door style and use this option to convert the wood panel to a glass-prep panel (no glass included). Mitered doors are not available with mullions. The interior will be unfinished Birch unless you also upgrade to a finished interior, which will match the exterior wood species and finishing color. Click to see examples

Optional: Change from flat to arch or cathedral top on upper door panels. Not available on Shaker or Mitered Doors. Click to see examples

Hinge location from your perspective when looking at the front of the cabinet.

Standard cabinets have 5/8" thick Poplar drawers with full-extension drawer glides. Upgrade options include 5/8" thick hard Maple drawers and soft-close undermount full-extension drawer slides. Click to see examples.

Optional: The stain-grade side option changes the type of material used on the sides of the cabinet from Birch plywood to Maple or Oak. The side will still be recessed 1/4-inch from the front corner. The stain-grade 3/4" flush side option also changes the side panel from 1/2" to a 3/4" thick so that the side will be flush with the face frame. The stain-grade matching end door option will have a flush side and a door attached to that flush side, which will stick out from the face frame by 3/4". If you have your cabinets stained or painted, the upgraded side will also be stained or painted. Click to view example of cabinet end options. An alternative is to use a separate end panel.

Optional: Other options to modify a base cabinet. For examples, see the cabinet options page.

Use this field to specify custom dimensions or any other notes about the cabinet if the options available are insufficient. Not all customizations are possible, so please see the Cabinet Options page for details.

Doors and drawer fronts can be built to overlay the face frame by 1/2 inch (standard overlay) or most of the frame (full overlay), or can be made so they fit into the frame flush with the front (inset). Examples can be seen on the door styles page.

Optional: To get glass doors, select a flat-panel, Shaker, or mitered flat-panel door style and use this option to convert the wood panel to a glass-prep panel (no glass included). Mitered doors are not available with mullions. The interior will be unfinished Birch unless you also upgrade to a finished interior, which will match the exterior wood species and finishing color. Click to see examples

Optional: Change from flat to arch or cathedral top on upper door panels. Not available on Shaker or Mitered Doors. Click to see examples

Standard cabinets have 5/8" thick Poplar drawers with full-extension drawer glides. Upgrade options include 5/8" thick hard Maple drawers and soft-close undermount full-extension drawer slides. Click to see examples.

Optional: The stain-grade side option changes the type of material used on the sides of the cabinet from Birch plywood to Maple or Oak. The side will still be recessed 1/4-inch from the front corner. The stain-grade 3/4" flush side option also changes the side panel from 1/2" to a 3/4" thick so that the side will be flush with the face frame. The stain-grade matching end door option will have a flush side and a door attached to that flush side, which will stick out from the face frame by 3/4". If you have your cabinets stained or painted, the upgraded side will also be stained or painted. Click to view example of cabinet end options. An alternative is to use a separate end panel.

Optional: Other options to modify a base cabinet. For examples, see the cabinet options page.

Use this field to specify custom dimensions or any other notes about the cabinet if the options available are insufficient. Not all customizations are possible, so please see the Cabinet Options page for details.

Choose between standard or custom heights (specify custom height in notes).

Use this field to specify custom dimensions or any other notes about the cabinet if the options available are insufficient. Not all customizations are possible, so please see the Cabinet Options page for details.

Choose between standard or custom heights (specify custom height in notes).

Use this field to specify custom dimensions or any other notes about the cabinet if the options available are insufficient. Not all customizations are possible, so please see the Cabinet Options page for details.