End Panels
|
To order an item, click on the size you need and then select from the available options.
If you need a custom size, click on the next largest cabinet and select the option to decrease
1 or 2 dimensions or increase the height. If you need something special, just contact us
at customerservice@highlandsdesigns.com
|
 |
Above Left: Maple Raised End-Panel for a Base Cabinet; Note:
you will need to cut out a notch 3"W x 4"H on the side of the
panel where the base cabinet toe kick is located
Above Center: Maple Raised End-Panel for a Wall Cabinet
Above Right: Dishwasher End Panel (view from top); Note: the
Refrigerator End Panel looks the same except that there is no toe-kick
area at the bottom |
| Products & Prices |
|---|
|
A 1-3/4" wide piece of solid wood on the front attached to a piece of stain-grade plywood; photo is from top and is of a right end panel
$45.00
|
A thin piece of stain-grade plywood for use on sides of standard base cabinet to fill in 1/4" of recessed space between face frame and wall; Note: you will need to cut out a piece from the corner go around the toe kick
$39.00
|
|
A thin piece of stain-grade plywood for use on sides of standard base cabinet to fill in 1/4" of recessed space between face frame and wall; Note: you will need to cut out a piece from the corner go around the toe kick
$17.00
|
A solid-wood frame with a flat panel inside for use on the sides of a standard base cabinet; Note: you will need to cut out a piece from the corner of the plywood to go around the toe kick area (door frame does not extend down into toe-kick area); photo is of raised end panel
$125.00
|
|
A solid-wood frame with a flat panel inside for use on the sides of a standard base cabinet; Note: you will need to cut out a piece from the corner of the plywood to go around the toe kick area (door frame does not extend down into toe-kick area); photo is of raised end panel
$62.00
|
A solid-wood frame with a raised-panel inside for use on the sides of a standard base cabinet; Note: you will need to cut out a piece from the corner of the plywood to go around the toe kick area (door frame does not extend down into toe-kick area)
$131.00
|
|
A solid-wood frame with a raised-panel inside for use on the sides of a standard base cabinet; Note: you will need to cut out a piece from the corner of the plywood to go around the toe kick area (door frame does not extend down into toe-kick area)
$65.00
|
A 1-3/4" wide piece of solid wood on the front attached to a piece of stain-grade plywood; photo is from top
$121.00
|
|
|
